Biến tần dòng Y980 chuẩn IP65 là dòng biến tần hiệu suất cao, đa năng. Cấp bảo vệ IP65 mang lại khả năng bảo vệ tối ưu, đặc biệt phù hợp cho các ứng dụng ngoài trời và môi trường khắc nghiệt.
Dòng Y980 được thiết kế với hệ thống ống gió độc lập trên toàn bộ dải sản phẩm, giúp nâng cao độ tin cậy và hiệu suất vận hành.
Biến tần Y980 sử dụng công nghệ điều khiển vector không cảm biến, mang lại khả năng truyền động và điều khiển vượt trội. Cùng với cấu hình phần cứng mạnh mẽ và chức năng phần mềm phong phú, sản phẩm giúp nâng cao tính dễ sử dụng và độ ổn định, đáp ứng đa dạng nhu cầu ứng dụng công nghiệp.
Đặc điểm nổi bật:
Cấp bảo vệ IP65
Điều khiển được nhiều loại động cơ
Thiết kế ống gió cách ly
Ứng dụng rộng rãi trong nuôi trồng thủy sản, xử lý nước, quạt công nghiệp,…
Thông số kỹ thuật:
|
Item |
Specifications |
|
|
Basic Functions |
Maximum Frequency |
Vector Control:0~500.0Hz V/F Control:0~500.0Hz |
|
Carrier Frequency |
0.5kHz~16kHz; the carrier frequency will be automatically adjusted according to the load characteristics. |
|
|
Input Frequency Resolution |
Digital Setting: 0.1Hz Analog Setting: 0.01V corresponding maximum frequency ×0.1% |
|
|
Control Mode |
Open Loop Vector Control(SVC); V/F Control |
|
|
Startup Torque |
G Type:0.5Hz/150%(SVC); P Type:0.5Hz/100% |
|
|
Basic Functions |
Speed Range and Precision |
1:100(SVC);±0.5%(SVC) |
|
Overload Capability |
G Type:150% rated current 60s ;180% rated current 3s
|
|
|
Torque Boost |
0.1%~30.0% |
|
|
V/F Curve |
Line Type、Square Type |
|
|
Acc. / dec Curve |
Straight line or S curve acceleration and deceleration mode Acceleration and deceleration time range between 0.0 to 500.0s. |
|
|
DC Brake |
DC Brake Frequency:0.00Hz to maximum frequency. Brake time: 0.0s to 36.0s |
|
|
Multi-speed Running |
It can realize at maximum of 8 segments speed running via the control terminal. |
|
|
Built-in PID |
It is easy to realize process-controlled closed loop control system. |
|
|
Over-voltage/current Stall Control |
It can limit the running voltage/current automatically and prevent frequent over-voltage/current tripping during the running process. |
|
|
Motor Over-temperature Protection |
Acceptable motor temperature sensor input (PT100, PT1000) |
|
|
Timing Control |
Timing control function:set time range 0.0~6500.0Min |
|
|
Bus Support |
Support Site Bus:Modbus |
|
|
Protection Function |
It can implement power-on motor short-circuit detection, output phase loss protection, over current protection, over voltage protection, under voltage protection, overheating protection and overload protection, which can be turned on or shielded as required. |
|
|
Running |
Running Command Source |
Operation panel reference, control terminal reference, and communication reference |
|
Target Frequency Source |
Digital reference, analog signal reference, multi-segment speed reference, PI control reference, and communication reference |
|
|
Control Signal Input Terminal |
2 digital input; 1 analog input ,support 0~10V、4~20mA、0~20mA signal |
|
|
Control Signal Output Terminal |
2 relay output 1 analog output ,support 0~10V、4~20mA、0~20mAsignal |
|
|
Environment |
Using Place |
Indoor, and be free from direct sunlight, dust, corrosive gas, combustible gas, oil smoke, vapor, drip or salt. |
|
Altitude |
0~4000m;Derating use when more than 1000m (decrease by 1% per 100 meters) |
|
|
Ambient Temperature |
-10 ℃ to +40 ℃ (Derating use when under ambient temperature of 40 ℃ to 50 ℃) |
|
|
Humidity |
Less than 95%RH, without condensing |
|
|
Vibration |
Less than 5.9m/s (0.6g) |
|
|
Storge Temperature |
-20℃~+60℃ |
|
|
Power Distribution System |
TN, TT |
|

