Biến tần dòng 900E là biến tần hiệu suất cao, thiết kế đơn giản, được trang bị màn hình LCD đa chức năng làm tiêu chuẩn, hỗ trợ nhiều loại động cơ và tích hợp điều khiển tốc độ, mô-men và vị trí.
Bên cạnh đó, sản phẩm có khả năng mở rộng mạnh mẽ, hỗ trợ phát triển thứ cấp theo yêu cầu khách hàng. Nhờ thiết kế mở rộng linh hoạt, biến tần 900E có thể đáp ứng nhanh chóng và hiệu quả các nhu cầu cá nhân hóa.
Đặc điểm nổi bật
Tần số sóng mang tự thích ứng 0,5 – 16 kHz
Tích hợp bộ điều khiển PID, hỗ trợ điều khiển đa cấp tốc độ (tối đa 2 cấp)
Hỗ trợ điều chỉnh tần số rộng 0 – 500 Hz (điều khiển vector/VF)
Hệ thống bảo vệ đa dạng: quá dòng, quá áp, thấp áp, ngắn mạch, v.v.
Thông số kỹ thuật
Item
Specifications
Basic Functions
Maximum Frequency
Vector Control:0~500Hz V/F Control:0~500Hz
Carrier Frequency
0.5kHz~16kHz; the carrier frequency will be automatically adjusted according to the load characteristics.
Input Frequency Resolution
Digital Setting: 0.1Hz
Analog Setting: 0.01V corresponding maximum frequency ×0.1%
Control Mode
Open Loop Vector Control(SVC); V/F Control
Startup Torque
G Type:0.5Hz/150%(SVC); P Type:0.5Hz/100%
Basic Functions
Speed Range and Precision
1:100(SVC);±0.5%(SVC)
Overload Capability
G Type:150% rated current 60s ;180% rated current 3s
Torque Boost
0.1%~30.0%
V/F Curve
Line Type、Square Type
Acc. / dec Curve
Straight line or S curve acceleration and deceleration mode
Acceleration and deceleration time range between 0.0 to 500.0s.
DC Brake
DC Brake Frequency:0.00Hz to maximum frequency. Brake time: 0.0s to 36.0s
Multi-speed Running
It can realize at maximum of 2 segments speed running via the control terminal.
Built-in PID
It is easy to realize process-controlled closed loop control system.
Over-voltage/current Stall Control
It can limit the running voltage/current automatically and prevent frequent over-voltage/current tripping during the running process.
Motor Over-temperature Protection
Acceptable motor temperature sensor input (PT100, PT1000)
Timing Control
Timing control function:set time range 0.0~6500.0Min
Bus Support
Support Site Bus:Modbus
Protection Function
It can implement power-on motor short-circuit detection, output phase loss protection, over current protection, over voltage protection, under voltage protection, overheating protection and overload protection, which can be turned on or shielded as required.
Running
Running Command Source
Operation panel reference, control terminal reference, and communication reference
Target Frequency Source
Digital reference, analog signal reference, multi-segment speed reference, PI control reference, and communication reference
Control Signal Input Terminal
2 digital input;
1 analog input,support 0~10V
Control Signal Output Terminal
1 analog output,support 4~20mA(Only applicable to temperature sensors)
Environment
Using Place
Indoor, and be free from direct sunlight, dust, corrosive gas, combustible gas, oil smoke, vapor, drip or salt.
Altitude
0~4000m;Derating use when more than 1000m (decrease by 1% per 100 meters)
Ambient Temperature
-10 ℃ to +40 ℃ (Derating use when under ambient temperature of 40 ℃ to 50 ℃)
Humidity
Less than 95%RH, without condensing
Vibration
Less than 5.9m/s (0.6g)
Storge Temperature
-20℃~+60℃
IP Level
IP20
Pollution Level
PD2
Power Distribution System
TN, TT

