Biến tần dòng AP2 là biến tần công nghiệp hiệu suất cao, đa chức năng, sử dụng chế độ điều khiển vector vòng hở (SVC) và điều khiển V/F, hỗ trợ dải tần số rộng từ 0 đến 599,9 Hz. Sản phẩm mang lại khả năng truyền động và điều khiển vượt trội, với dải điều chỉnh tốc độ 1:100, độ chính xác ±0,5% ở chế độ điều khiển vector, đồng thời cung cấp mô-men khởi động lên tới 150% (loại G), đáp ứng đa dạng nhu cầu ứng dụng công nghiệp.
Được thiết kế với cấp bảo vệ IP54, biến tần AP2 có khả năng chống bụi và chống nước bắn, phù hợp cho môi trường công nghiệp khắc nghiệt. Độ tin cậy cao và khả năng thích nghi môi trường tốt giúp thiết bị vận hành ổn định trong các điều kiện làm việc khắt khe.
Với tính năng tiên tiến và kết cấu bền bỉ, biến tần công nghiệp AP2 mang đến giải pháp truyền động tin cậy cho nhiều ứng dụng tự động hóa và điều khiển công suất.
Đặc điểm nổi bật
Chuẩn IP54: chống bụi và chống nước
Điều khiển vector hiệu suất cao (SVC)
Hỗ trợ lưới điện TN/TT
Tích hợp bộ điều khiển PID, điều khiển đa cấp tốc độ, bộ lọc và giao thức truyền thông Modbus
Thông số kỹ thuật
|
Item |
Specifications |
|
|
Basic Functions |
Maximum Frequency |
Vector Control:0~599.9Hz V/F Control:0~599.9Hz |
|
Carrier Frequency |
0.5kHz~16kHz; the carrier frequency will be automatically adjusted according to the load characteristics. |
|
|
Input Frequency Resolution |
Digital Setting: 0.1Hz Analog Setting: 0.01V corresponding maximum frequency ×0.1% |
|
|
Control Mode |
Open Loop Vector Control(SVC); V/F Control |
|
|
Startup Torque |
G Type:0.5Hz/150%(SVC); P Type:0.5Hz/100% |
|
|
Basic Functions |
Speed Range and Precision |
1:100(SVC);±0.5%(SVC) |
|
Overload Capability |
G Type:150% rated current 60s ;180% rated current 3s
|
|
|
Torque Boost |
0.1%~30.0% |
|
|
V/F Curve |
Line Type、Square Type |
|
|
Acc. / dec Curve |
Straight line or S curve acceleration and deceleration mode Acceleration and deceleration time range between 0.0 to 500.0s. |
|
|
DC Brake |
DC Brake Frequency:0.00Hz to maximum frequency. Brake time: 0.0s to 36.0s |
|
|
Multi-speed Running |
It can realize at maximum of 8 segments speed running via the control terminal. |
|
|
Built-in PID |
It is easy to realize process-controlled closed loop control system. |
|
|
Over-voltage/current Stall Control |
It can limit the running voltage/current automatically and prevent frequent over-voltage/current tripping during the running process. |
|
|
Motor Over-temperature Protection |
Acceptable motor temperature sensor input (PT100, PT1000) |
|
|
Timing Control |
Timing control function:set time range 0.0~6500.0Min |
|
|
Bus Support |
Support Site Bus:Modbus |
|
|
Protection Function |
It can implement power-on motor short-circuit detection, output phase loss protection, over current protection, over voltage protection, under voltage protection, overheating protection and overload protection, which can be turned on or shielded as required. |
|
|
Running |
Running Command Source |
Operation panel reference, control terminal reference, and communication reference |
|
Target Frequency Source |
Digital reference, analog signal reference, multi-segment speed reference, PI control reference, and communication reference |
|
|
Control Signal Input Terminal |
5 digital input; 2 analog input,support 0~10V、4~20mA、0~20mA、20~0mA、20~4mA and 10~0V signal |
|
|
Control Signal Output Terminal |
1 relay output,2 collector output; 2 analog output,support 0~10V、4~20mA、0~20mA、20~0mA、20~4mA and 10~0Vsignal |
|
|
Environment |
Using Place |
Indoor, and be free from direct sunlight, dust, corrosive gas, combustible gas, oil smoke, vapor, drip or salt. |
|
Altitude |
0~4000m;Derating use when more than 1000m (decrease by 1% per 100 meters) |
|
|
Ambient Temperature |
-10 ℃ to +40 ℃ (Derating use when under ambient temperature of 40 ℃ to 50 ℃) |
|
|
Humidity |
Less than 95%RH, without condensing |
|
|
Vibration |
Less than 5.9m/s (0.6g) |
|
|
Storge Temperature |
-20℃~+60℃ |
|
|
IP Level |
IP54 |
|
|
Pollution Level |
PD2 |
|
|
Power Distribution System |
TN, TT |
|

