FREE

Hồ sơ

Công ty TNHH công nghệ Indrvct Thâm Quyến Quốc gia: Trung Quốc Tỉnh thành: Thâm Quyến Ngày tham gia: 15/01/2026 Thành viên miễn phí Sản phẩm chính: biến tần Lượt truy cập: 1,870 Xem thêm Liên hệ

Biến tần công nghiệp dòng AP2 – Chuẩn IP54

Ngày đăng: 15/01/2026

Liên hệ

Xuất xứ: Khác

Bảo hành: liên hệ

Phương thức thanh toán: tiền mặt hoặc chuyển khoản

Khả năng cung cấp: theo nhu cầu của khách hàng

Đóng gói: liên hệ

Liên hệ

Thông tin chi tiết

Biến tần dòng AP2 là biến tần công nghiệp hiệu suất cao, đa chức năng, sử dụng chế độ điều khiển vector vòng hở (SVC) và điều khiển V/F, hỗ trợ dải tần số rộng từ 0 đến 599,9 Hz. Sản phẩm mang lại khả năng truyền động và điều khiển vượt trội, với dải điều chỉnh tốc độ 1:100, độ chính xác ±0,5% ở chế độ điều khiển vector, đồng thời cung cấp mô-men khởi động lên tới 150% (loại G), đáp ứng đa dạng nhu cầu ứng dụng công nghiệp.

Được thiết kế với cấp bảo vệ IP54, biến tần AP2 có khả năng chống bụi và chống nước bắn, phù hợp cho môi trường công nghiệp khắc nghiệt. Độ tin cậy cao và khả năng thích nghi môi trường tốt giúp thiết bị vận hành ổn định trong các điều kiện làm việc khắt khe.

Với tính năng tiên tiến và kết cấu bền bỉ, biến tần công nghiệp AP2 mang đến giải pháp truyền động tin cậy cho nhiều ứng dụng tự động hóa và điều khiển công suất.

Đặc điểm nổi bật

Chuẩn IP54: chống bụi và chống nước

Điều khiển vector hiệu suất cao (SVC)

Hỗ trợ lưới điện TN/TT

Tích hợp bộ điều khiển PID, điều khiển đa cấp tốc độ, bộ lọc và giao thức truyền thông Modbus

Thông số kỹ thuật

Item

Specifications

Basic Functions

Maximum Frequency

Vector Control:0~599.9Hz      V/F Control:0~599.9Hz

Carrier Frequency

0.5kHz~16kHz; the carrier frequency will be automatically adjusted according to the load characteristics.

Input Frequency Resolution

Digital Setting: 0.1Hz

Analog Setting: 0.01V corresponding maximum frequency ×0.1%

Control Mode

Open Loop Vector Control(SVC); V/F Control

Startup Torque

G Type:0.5Hz/150%(SVC);  P Type:0.5Hz/100%

Basic Functions

Speed Range and Precision

1:100(SVC);±0.5%(SVC)

Overload Capability

G Type:150% rated current 60s ;180% rated current 3s

 

Torque Boost

0.1%~30.0%

V/F Curve

Line Type、Square Type

Acc. / dec Curve

Straight line or S curve acceleration and deceleration mode

Acceleration and deceleration time range between 0.0 to 500.0s.

DC Brake

DC Brake Frequency:0.00Hz to maximum frequency. Brake time: 0.0s to 36.0s

Multi-speed Running

It can realize at maximum of 8 segments speed running via the control terminal.

Built-in PID

It is easy to realize process-controlled closed loop control system.

Over-voltage/current Stall Control

It can limit the running voltage/current automatically and prevent frequent over-voltage/current tripping during the running process.

Motor Over-temperature Protection

Acceptable motor temperature sensor input (PT100, PT1000)

Timing Control

Timing control function:set time range 0.0~6500.0Min

Bus Support

Support Site Bus:Modbus

Protection Function

It can implement power-on motor short-circuit detection, output phase loss protection, over current protection, over voltage protection, under voltage protection, overheating protection and overload protection, which can be turned on or shielded as required.

Running

Running Command Source

Operation panel reference, control terminal reference, and communication reference

Target Frequency Source

Digital reference, analog signal reference, multi-segment speed reference, PI control reference, and communication reference

Control Signal Input Terminal

5 digital input;

2 analog input,support 0~10V、4~20mA、0~20mA、20~0mA、20~4mA and 10~0V signal

Control Signal Output Terminal

1 relay output,2 collector output;

2 analog output,support 0~10V、4~20mA、0~20mA、20~0mA、20~4mA and 10~0Vsignal

 

Environment

Using Place

Indoor, and be free from direct sunlight, dust, corrosive gas, combustible gas, oil smoke, vapor, drip or salt.

Altitude

0~4000m;Derating use when more than 1000m (decrease by 1% per 100 meters)

Ambient Temperature

-10 ℃ to +40 ℃ (Derating use when under ambient temperature of 40 ℃ to 50 ℃)

Humidity

Less than 95%RH, without condensing

Vibration

Less than 5.9m/s (0.6g)

Storge Temperature

-20℃~+60℃

IP Level

IP54

Pollution Level

PD2

Power Distribution System

TN, TT